DPA d:screet 4063 Mini Omnidirectional, Standard Sensitivity, Low DC
Designed for use with wireless systems in theatres, television, and close-miked instrument applications, these tiny condenser micsare omnidirectional and therefore do not need to be aimed directly at the sound source.
DPA 4063 is acoustically identical with the DPA 4061, but the FET preamp in the input stage is designed for working with the lower supply voltage. For acordless microphone, choose between our adapter system or a hardwired connector.
Musicians and engineers use them as live or studio microphones for close-miking acoustic string instruments. With broadcasters,the smallcondenser microphones are popular as lavalier and tie mics.
Two different grids are supplied(one high boost and one soft boost) and by changing these grids you can acoustically modify the microphone's response according to their placement on the body. Additionally, a wide range of accessories is available, such as windscreens, clips and holders, extension cables, andpower supplies.
A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional wireless systems plus 48 V Phantom.
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice, Lectrosonics, Micron, Mipro, Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa, Vega and other systems. Each adapter for your cordless microphone is guaranteed to perfectly mate to your system of choice.
Offering great detail and resolution, the 4063shave a neutral sonic character andare very natural sounding. The 4063 has a very low noise floor, impressive sensitivity and can handle high SPLs. For full technical specs, please click the Specifications tab above.
The DPA 4060, 4061, and4062 are acoustically identical to the 4063 but have different SPL handling or sensitivity.Specifications for 4063 Omnidirectional, Lo-Sens & DC
|Principle of operation:||Pressure|
|Cartridge type:||Pre-polarized condenser element with vertical diaphragm|
|Frequency range, 2 dB:||Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz.|
|Sensitivity, nominal, 3 dB at 1 kHz:||6 mV/Pa; -44 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Typ. 26 dB(A) re. 20 Pa (max. 28 dB(A))|
|Equiv. noise level ITU-R BS.468-4:||Typ. 38 dB (max. 40 dB)|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||68 dB(A)|
|Total harmonic distortion (THD):||<1% THD up to 123 dB SPL peak; <1% THD up to 120 dB SPL RMS sine|
|Dynamic range:||Typ. 97 dB|
|Max. SPL, peak before clipping:||138 dB|
|Output impedance:||30 - 40 ohm|
|Cable drive capability:||Up to 300 m (984 ft)|
|Power supply:||For wireless systems: Min. 3 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power 4 V for full performance.|
|Color:||Black, beige, white|
|Microphone weight:||7.5 g (0.26 oz) incl. cable and MicroDot connector|
|Microphone diameter:||5.4 mm (0.21 in)|
|Microphone length:||Max. 12.7 mm (0.5 in)|
|Cable length:||1.8 m (6 ft)|
|Cable diameter:||1.6 mm (0.06 in)|
|Polarity:||Positively increasing sound pressure produces positive going voltage on MicroDot pin|
|Operating temperature range:||-40 C to 45 C (-40 F to 113 F)|
|Relative Humidity (RH):||Up to 90%|