Miniature Voice Microphone with a Microdot Termination
4071 Omnidirectional, Low-cut, Presence Boost
An outstanding speech and vocal miccrophone, the 4071 will make your voice heard and intelligible.
Use it for all ENG/EFP and even applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.
When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive.
For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp (and the wireless system) will have much larger headroom.
It removes distant rumbling from cars, trains, airplanes, etc.
AnotherĀ andĀ equally important consideration is that when placing a microphone on the body, espcially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility.
The 4071 has a built-in boost to compensate for this loss. Especially for ENG work the 4071 is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.
The 4071 lapel mic is available in three colors: black, beige and white.
For a wireless microphone, choose between our adapter system or a hardwired connector.
Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors.
AĀ wide range of accessories is available, such as windscreens in different colors, clips and holders, extension cables, and power supplies.
A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice, Lectrosonics, Line 6, Micron, Mipro, Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa, Vega and other systems. Each adapter for your cordless microphone is guaranteed to perfectly mate to your system of choice.
The 4071 features a specially designed, fixed microphone grid with a soft presence boost of typically 5 dB at 4 to 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within the area that the 4071 grid boosts. For full technical specs, please click the Specifications tab above.
The FMK4071 film microphone kit is made for film or TV production where the microphone needs to be invisible. The EMK4071 ENG/EFP microphone kit is configured to include the mic and accessories necessary for electronic news gathering and electronic field production.Specifications for 4071 Omnidirectional, Low-cut, Presence Boost
|Principle of operation:||Pressure|
|Cartridge type:||Pre-polarized condenser element with vertical diaphragm|
|Frequency range, Ā± 2 dB:||100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz|
|Sensitivity, nominal, Ā±3 dB:||6 mV/Pa ved 1 kHz; -44.4 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Typ. 26 dB(A) re. 20 ĀµPa (max. 28 dB(A))|
|Equiv. noise level ITU-R BS.468-4:||Typ. 38 dB (max. 40 dB)|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||68 dB (A)|
|Total harmonic distortion (THD):||< 1 % THD up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine|
|Dynamic range:||Typ. 97 dB|
|Max. SPL, peak before clipping:||144 dB|
|Output impedance:||30 - 40 ohm|
|Cable drive capability:||Up to 300 m (984 ft)|
|Power supply:||For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power Ā±4 V for full performance.|
|Color:||Black, beige or white|
|Microphone weight:||9 g (0.32 oz) incl. cable and MicroDot connector|
|Microphone diameter:||5.4 mm (0.2 in)|
|Microphone length:||17 mm (0.67 in)|
|Cable length:||1.8 m (5.9 ft)|
|Cable diameter:||1.6 mm (0.06 in)|
|Polarity:||Positively increasing sound pressure produces positive going voltage on MicroDot pin|
|Operating temperature range:||-10 to 45Ā°C (14 to 113Ā°F)|
|On-axis frequency response of DPA 4071-BM||Directional Characteristics of DPA 4071|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.