The specific tuning ranges for this product is 941.525 – 951.975 MHz, 952.875 – 955.225 Mhz, and 956.475 – 959.825 MHz. Parts of these bands are shared with MAS (Multiple Access Systems) and some fixed microwave devices. Operators using the 941-960 band should always coordinate their frequencies with the local office of the SBE (Society of Broadcast Engineers), whenever possible, and take care to select frequencies that are least likely to result in interference with other licensees in the same area. These products all meet the new spectral mask regulations imposed by the FCC and in effect for all new wireless microphones after October, 2018.
- Digital Hybrid Wireless Technology*
(U.S. Patent #7,225,135)
Variable, selectable power output:
- SMQV: 50mW, 100mW, 250mW
- Membrane switch control panel with LCD display
- 256 synthesized UHF frequencies
- Wide input dynamic range
- DSP based pilot-tone signal
- Circulator/Isolator output stage
- Splash-proof, machined aluminum housing
- Non-corrosive, super-hard finish
To meet the demand for both extended operating range and extended battery life, the "V" series SM transmitters offer selectable output power of 100 or 250 mW. A third selection at 50 mW is provided for some theatrical applications where the system design specifies lower transmitter power.
The input section features the unique servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB for excellent overload protection and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion. The limiter recovers quickly from brief transients, with no audible side effects, and also recovers slowly from sustained high levels to keep audio distortion low while preserving short term dynamics.
*Digital Hybrid Wireless is a revolutionary new design that combines 24-bit digital audio with an analog FM radio link to provide outstanding audio quality and the extended operating range of the best analog wireless systems. The design overcomes channel noise in a dramatically new way, digitally encoding the audio bitstream in the transmitter and decoding it in the receiver, yet sending the encoded information via an analog FM wireless link. This proprietary DSP algorithm eliminates a compandor circuit and its artifacts and preserves the RF spectral footprint of analog FM designs to simplify multi-channel coordination with existing analog wireless systems.
- 2 - AA Lithium Batteries
- 1 - Foam Insulating Pads (Part #35923)
- 1 - Pouch (Part #35697)
- 1 - Mic Connector Kit (Part #SMKITTA5)
- 1 - Belt Clip (Part #SMBCUPSL)
- 1 - Quick Start Guide
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.